Mr Masking Sol Re2 Masking Fluid by Mr Hobby M135
$9.99
16 en inventaire
Description
A Renewed MR. MASKING SOL R
A water-soluble masking material that can be taped on and peeled off, by changing to a new sol component without changing its usability.
The way to use and the basic characteristic are the same. It is a very suitable for masking of curved surfaces which are difficult to be handled with masking tape because of liquid masking material.
When it is difficult to peel off the film, use a cotton swab soaked in water and peel off the film while dissolving it because it is a water-soluble film even after drying.
Traits:
- It is a water-soluble masking material, so it is possible to change the concentration by diluting it with water. (Please note that the mask may be dissolved by water in the paint AQUEOUS HOBBY COLOR or ACRYSION are applied on top.)
- You can cut the layer after it dries using a design knife or a cutter knife. It is recommended to use a new blade when cutting. Cutting with a blade that is less sharp may cause the edges to float.
Item: M135
Replaces:
Mr Masking Sol R by Mr Hobby M133 which is discontinued due to this new formulation.
Contenu sujet à changement.
