They Don’t Want You to Know About These Sprue Hacks!

Don’t throw away those leftover sprues just yet!

Transcript*

Skit

Garbage day.

Intro

Hello all, this is David from Loisirs vers le soleil and stop me if you’ve done this. You’ve thrown out an empty sprue tree thinking, “It’s just garbage.” Then you think to yourself later as you’re working on something, “Man, I could have used some spare plastic here.” After today, not anymore. Because in today’s video, I’m going to explain why you shouldn’t throw out empty sprue trees, and I will also show you all the neat things you can do with leftover plastic. That’s convenient.

Extra Sprues

So, if you have ever built a plastic scale model in your life, you’ve noticed, at least I hope you’ve noticed, that [music] all the parts come on these sprue trees, as we call them. They are in a nice rectangular [music] shaped structurally sound piece of plastic. Or [music] if you were unlucky enough to buy an ancient kit disguised as a new one, they’ll usually look like this with the parts [music] hanging on narrowly by a thread and half of the contents are just loose and flopping around in the box. But hopefully you got something good. So when you usually build your kit, there may be two or three parts left on the sprue.

This could be because your kit has several building options [music] or they’re just generous enough to give you spare parts. Definitely keep those. You could lose a part in the future or you [music] need to scratch build something. Those are always great to have. So, put those in a bin and keep those safe. You should also clip off a few of these sprue trees and keep the parts. And in this video, I’m going to show you a few helpful ways that these seemingly useless pieces of plastic can serve. Starting with number one, making sprue.

When to Use Sprue Goo

All right. Now, come closer. What I’m about to tell you is an insider trade secret that many powerful people in the industry do not want you to know. So if one day you ever find me in my closet with a noose around my neck, I didn’t do it. So this is what we call sprue goo. It is a mixture of tamiya extra thin cement and leftover plastic. Once the two are combined, it creates a viscous putty like substance.

Now, if you’ve ever used something like [music] Tamiya putty, don’t get me wrong, it’s a good product, but it has a nasty tendency once it’s dried to crack whenever you squeeze around the area. With sprue goo, you don’t have that since it is essentially melted [music] plastic. All you got to do is apply it over your seam and then let it dry for about 24 hours and then after that you simply just scrape away the excess with either a hobby knife or a mould line remover and [music] then sand it down till it’s completely smooth.

How to Make Sprue Goo

Now how you make it is incredibly simple. You just take some Tamiya extra thin cement, preferably a bottle that’s almost halfway done. And then you’re going to want to take a bunch of plastic [music] bits from your sprue. Now, the final consistency, you’re going to want it to be pretty thick, but still somewhat runny. If you have it too thick, then it’s not going to spread very well. I’m afraid I can’t really tell you [music] a specific ratio for this. You just got to kind of eyeball it. [music] Anyway, you simply pour it in and give that 24 hours to completely melt together. And then by then, you’ll know [music] if it’s too runny or too thick. So, you can always add some more parts or if you have another bottle of extra thin cement, [music] add a tiny bit into it to thin it down. And that’s it. you’ve got yourself a great substitute for putty. A second use for leftover sprue is stretched sprue.

Stretched Sprue

So, there’s this very neat effect you can do where if you clip off a nice long piece of sprue and hold it under a flame for a few seconds, the plastic will start to soften. [music] And then at the right time, you just gently pull it till it stretches out to a much thinner [music] frame. This can be used for rigging. Uh you can use it to make [music] antennas for tanks or aircraft. Uh you can make pitot tubes for smaller scale subjects. You can even make gun barrels with this, too. So, how do you do this? It’s going to be a little tricky your first few times. You just got to get the timing down. [music] So, hold it about an inch away from the flame. And you’ll notice that the part will start to lighten where the heat is getting to it.

And then, yeah, right when it starts to bend like that, you pull very gently and hold for a few seconds. Wait for it to cool down. And there you go. So, if you wanted to, you could just clip off a nice tapered end of this. Take some CA glue. And another great thing about stretch sprue is [music] it can act as a glue applicator as well. And then take your model and [music] the part you just cut off. And there you go. That antenna you lost that you tore your whole house apart looking for, you have simply just replaced it with some stretch sprue and it looks just as good as the real thing.

Diorama Effects

And one last thing you can use leftover sprue for is for terrains. Let’s say for example you want to do a cobblestone street. [music] One way you could do it, you can chop up a whole bunch of sprue, either regular size or stretched, get your base, some white glue, and just spread it on there. And you can also do the same thing and make slightly bigger rocks. You can cut them up a little, make them look more jagged, [music] and you got a quick and easy diorama.

David’s Conclusion

In conclusion, like many things in the hobby, the only limits are your imagination. There is literally so much more you can do with this that I didn’t mention in the video, [music] but uh you know, I have places to be. So, I hope you enjoyed this video. Uh, let us know in the comments if you have worked with recycled sprues and what you like to use them for. So again, thank you very much for watching this video. Remember to like, comment, subscribe, follow us on our socials, and until the next one. Uh, hey, some guys in black suits are looking for you right outside. Thank you, Paul. It was nice knowing you. Adios.

About the Author:

David Peckam has built scale models since he was 12, specializing largely on military aircraft. He is a makeup artist and background actor for films and TV. He enjoys watching hockey and of course, movies. He has an excellent knowledge of hobby products and if you have questions concerning scale model airplanes.

*Video by David Peckham
Video Edited by
Daniela Castellano and Leo Nguyen
Transcript generated by youtube
Edited by
Angelo Castellano

Item added to cart.
0 items - $0.00