Durability to the Test!
Transcript*
Skit
Ever since the release of Warhammer Tone Pro Paints, people have told me that the paints themselves, the quality of them, are great, but some people have told me that the durability is suspect. So today we’ll put that to the test. Are they exaggerating? Are they completely right? Or are they completely wrong? We will find out. My name’s Mark Plyer. I can’t do Mark Plyer’s voice. My voice is nowhere deep enough. My name’s Paul. Welcome back to another Loisirs vers le soleil YouTube channel video.
Intro
But before we get started, I’d just like to quickly point out that every single item shown in this video is available on our website right now, sunwardhobbies.ca. That’s our real-time inventory. We also ship nationwide, same-day shipping, especially now because we’re getting ready for Black Friday. Keep an eye out on your favorite items. Odds are it’s probably going to get restocked sometime before the year ends. Thank you.
Touch Test
As an aside, there are genuinely some people on here that think this paint line should and will fail. All David and I said was that the paint line was good in the two demos we did, or technically three. We have a social media version. So yeah, this video genuinely is for you guys. No spite, no nothing. There’s no anger in this video. We will be demoing the durability of Tone Pro. Onto the touch test. This is the green Space Marine that David did on his demo. This is the green Space Marine that was airbrushed with Vallejo Airbrush Thinner as the thinner for Tone Pro. It is also primed and has been sitting here for over a month and a half, so it’s more than settled. Count with me. One, two, three, four, five, six, seven, eight, nine, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25. Okay, let’s see if rubbed off on my finger. See? Nothing. Test one complete and it passed with flying colors.
Not a single green on my thumb. But why 25? Right? Because in my head it going from the display case in your house, you putting it onto the travel box, you driving to the house of your opponent or the store, unloading it onto the table, spectators touching it every now and then, you playing a full two to three hour 40k game assuming the piece didn’t get shut off the board, you whether winning or losing put it back on the travel case and then you driving back, unloading it and putting it back onto the display. In my opinion, that’s around 25 touches and mind you, those are not consecutive touches. That’s split across five hours at least. In my opinion, that is a harder test and a better stress test. And yes, it has been primed here and it has been sitting for over a month and a half, which means it has settled and it is stronger. But you guys have been using miniatures that have been sitting there for over a year, two years, five years, whatever. And so I’m assuming a lot of you guys, most of you guys should have no problem with my test. It makes sense to me.
Enamel Wash Test
For the enamel test, we will be adding a second miniature. This white and yellow one is the demo piece I use or one of in my brush painting demo. While David used this for airbrushing. So yeah, just so there’s some variance. I feel like the dark green might be a bit too dark on camera, so you might not see the effect of the enamel if there is any on the paint. The plan, apply streaking grime on both miniatures and film a 15-minute time lapse afterwards. And then after the 15 minutes, you will be dabbing off and scrubbing off the excess with this Tamiya weathering sponge 87084. All right, both minis are absolutely smothered. And it’s really been 3 minutes already, but here we go. All right, it’s been 15 minutes and 30 seconds. All right. Now let’s remove it with odorless thinner. First we’re going to dab off the excess, then we’ll go a little rougher. Always have paper towel with you just in case. And then here we go. You will dab off the excess. Just dip your sponge brush onto the odorless thinner and just remove the excess.
If you feel like it’s already been overloaded, just dip it back, remove it with the paper towel, dip it back, just reapply. Rinse and repeat. Literally in this case. Now initial impression, the white side, which is on the left here, definitely yellowed. Brownish yellow, but that’s because we did apply quite a bit of the Starship Wash. That’s the AK Starship Wash. And the yellow itself didn’t really do much. I feel like the yellow is a better metric for this as yellow would definitely fade as I used a white primer, as you can see in the demo itself from a month and a half ago as a primer, so it would definitely fade into some sort of white. But no, it’s not. White just became some sort of ivory, really dirty ivory, still ivory, and the yellow remained a yellow just incredibly dirty. Onto the green. See, this is the beauty of enamel wash. You have a decent amount of time to work with it as by the 15 to 20 minute mark, most of its carrier has evaporated, but you can sort of reactivate it with the enamel odorless thinner and propagate it everywhere else. So it is more brown now, but that’s to be expected. It’s a very vibrant enamel wash. And believe David primed it with black, and the fact that the black is not showing underneath at all is a good sign at the paint held up. But the true test will be what’s to come plus lacquer. But Paul, that’s a gentle sort of dab test.
What about an actual brush test? You’re right. So we’ll reuse the brosser. I’ve cleaned it off um and dip this on odorless thinner in odourless thinner and just I wouldn’t say roughly, but we’ll definitely uh propagate the brush and I’ll rub it this time, not just dabbing, right? So I’m brushing it on and propagating it everywhere. And I’m going to be slightly more rough than I was with the uh sponge brush from Tamiya. And as you can see, it’s still held up. Maybe let’s add a bit more, see what happens. Yeah, no. That was great. So durable It definitely passed the enamel test. I was actually expecting it to sort of fail the enamel test. So the fact that it’s kind of just passing it with flying colors, dirty, but it passed is A+ in my opinion. Yeah. See, nothing. Paint’s not chipping off. Rub, melting off, nothing. It’s just more grim, dark, and dirty. I’m going to be wrapping them up in paper towel just to dry them off. This is definitely a rougher test because there’s a foreign objects around in the entire thing. It could legitimately flake off here. No. See? Still alive. Wow. Let’s try it with the green. I even dropped it. Nope. Wow. Yeah. It passed the enamel test with flying colors. Perfect.
Lacquer Spray
The hardest test yet we will be using Tamiya TS80 Rest in Peace, at least in Canada. And as you know, this is the flat clear, meaning if it’s shiny at all after the spray, after we let it dry, that means it reacted negatively uh and it failed. If it bubbles, it fails. If it cracks, it fails. It melts, it fails. Slops off, it fails. It shouldn’t be because it’s flat. So yeah, here it is. I’m not seeing anything that changed in terms of well, negative change anyway. It’s pretty matte, no shine, no cracking, melting, popping, sloffing off. I am touching it with my bare hands. My hands have been dirty this entire time, so that’s okay.
Let’s a rub test. One, two, three, four, five, six, seven, eight, nine, ten, eleven, twelve, thirteen, fourteen, fifteen, sixteen, seventeen, eighteen, nineteen, twenty, twenty-one, twenty-two, twenty-three, twenty-four, twenty-five, twenty-six, twenty-seven, twenty-eight, twenty-nine, thirty. I gave extra rubs to the yellow one because my left hand, I’m not ambidextrous, you know. Uh but yeah, nothing. Well, done. Games Workshop, an incredibly durable paint in So, what did we learn?
Paul’s Conclusion
That’s right that sometimes a paint line is just great and we just have to accept that. Is it perfect? Not No, it’s not. It has mistakes, people will tell you. But at the same time, it’s great. We proven the paint quality across three demos, one of which was a social media thirty-second demo and then a fourth demo now for durability. Right? Great paint line. So, what do you guys think of the demo? Hopefully, you guys enjoyed it. Did I miss anything? If you say acrylic polyurethane from Vallejo, that’s not a test. Everyone dies under acrylic polyurethane, Vallejo’s acrylics included. Um so, yeah, that’s not a test, okay? Um but that being said, thank you guys so much for watching. Uh links in the description down below for all our social media accounts.
Pick your poison, follow us there. We’re active on all of them. Also down below is our real-time website. We ship nationwide. We ship same day. Eighty dollar free shipping pre-tax, pretty damn good deal. Also down below finally is the like and subscribe buttons. If you enjoy this video and found it informative, follow us uh and subscribe. We hit twenty K. Thank you. Thank you. Thank you. So, yeah. Till next time, guys. Bye-bye.
About the Author:
Paul Catindig As someone who’s been building model kits since he was 8 years old, Paul is very knowledgeable and adept at model kit building! When he’s not building or painting kits, he spends his free time cooking, playing video games with friends, or at a restaurant patio somewhere. Hopes to make his very own movie one day.
*Video by Paul Catindig
Video Edited by
Daniela Castellano and Leo Nguyen
Transcript generated by youtube
Edited by Angelo Castellano