Alclad II ALC 709 Candy Electric Blue Enamel


Out of stock

Email when stock available

SKU: 853328007097 Category:


For a complete selection of Alcad II Lacquers, please see our selection chart

Candy Finishes from Alclad II

Size: 1 fl oz/ 30ml

Item#: ALC 709 Candy Electric Blue Enamel

We try to have stock at all times.  Large orders may require time to fill.

Contents subject to change.  Price includes in store coupon.

The surfaces to be painted must be thoroughly clean and free from dust, grease,oil and finger marks.

Apply the correct primer for the type of Alclad being used.

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh.

Candy Enamels:
Bright Silver Candy Base:
Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively damp or humid conditions.Finger marks on the bare plastic will appear in the final finish.

Candy Enamel top coats:
Shake thoroughly before use. Do not thin. Apply over Alclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.

Additional information

Weight0.2 kg
Dimensions1 × 1 × 1 cm