• Micro Kristal Klear by Microscale Industries MI-9 MI9

Micro Kristal Klear by Microscale Industries MI-9 MI9

$6.99

Out of stock

Email when stock available

SKU: 710208001098 Category:

Description

Plastic Adhesive & Window Forming Material
First, micro krystal klear is a liquid that can be used to form very real looking small windows up to about 1/4″” in size. It is also an adhesive for mounting clear plastic parts, windows, etc. on your models.

It can be used to make lens both clear and coloured with the addition of a little food colouring. what really makes a remarkable difference in your models is the simple fact that the clear parts can be joined to the painted parts with a completely clear adhesive. What this means is that you do not have to mask around the clear parts, something that is rarely completely successful anyway. and the sills which are painted can be seen through the clear micro krystal klear for the most realistic looking windows you will see on a model. And what the pros like best, it is fast and easy and it stays clear.

It cleans-up with water while wet, and is waterproof when dry. you can tell when it is dry because it turns from milky white to clear. and if that were not enough, if you need a super strong and flexible adhesive for wood, plastic, paper or most combinations of dissimilar materials.

Instructions: (Ready before use)
As an adhesive:
Apply to joint with a brush. Keep parts pressed together until dry using clamps, rubber bands, tape, etc. Any excess may be wiped away with a damp tissue before the Micro Kristal Klear dries. Allow at least 15 minutes to dry. – Longer if the thickness warrants it.

Forming small windows:
(1/4″ or smaller) After the model has been painted, use a toothpick to apply Micro Kristal Klear around the edges of the window opening, drawing the material across to form a film across the entire opening. When dry, the film forms a very thin, clear pane of “glass”. Clean up with water while wet.

Forming lenses:
Simply apply a drop of Micro Kristal Klear to a sheet of waxed paper and allow it to dry. Add a small bit of food  colouring to colour the lenses.

Instruction Sheet – microscale.pdf – 2.3MB PDF

Size: 1 oz

Item: MIC-MI-9

Price includes in store coupon.  Contents subject to change.

Customer Reviews

Based on 9 reviews
89%
(8)
11%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Alain Vincent
Micro Kristal Clear

Very good product to do lens and others parts clear.

A
Andre Dionne

Great store to get your modeling items

K
Kevin Zwicker
Micro Kristal Klear by Microscale Industries MI-9 MI9

I have enjoyed using this product for years, for realistic lenses between 2 + 3 mm
I have found nothing better. By using food coloring I have great results in making tail lights and signal lights in 1:25 scale. Sunward hobbies has proven invaluable in providing this resource.

P
Pierre Landry
Great

Great glue for gluing windows.

B
Bill
Keep lid on tight.

Really dries clear and eventually hard. Great for clear parts because there's no glazing. I often use this glue for parts where I need lots of time to position properly. I just use a little glue for positioning, let it dry, then use the other stronger glue to finalize. It's perfect for attaching canopies and very workable with a moist Q-tip. Actually has a reasonably strong adhesion and can also be used for very small parts that receive little stress. This glue serves its purpose well.