Mr Color Spray S61 Burnt Iron Metallic Primary

Mr. color solvent-based acrylic paint has long been highly regarded by modellers worldwide. Mr color delivers an outstanding finish with a wide range of colours available.

Suitable for both brush and airbrush.

Recommended thinners for the Mr. colour range:

• Mr. Color thinner is the basic standard thinner for mr. Color. Thinning ratio 1 : 0.8~1.0
• Mr. Leveling thinner: slows down the drying speed. Recommended for gloss paints. Use this thinner to dilute mr. Color for airbrush use. Thinning ratio 1: 1~2
• Mr. Rapid thinner: mr. Rapid thinner:Speeds up the drying speed. Recommended for matt paints and metallic paints.

Mr. Color paints can be mixed with: mr. Colour, mr. Color gx, mr. Metallic color gx, mr. Clear color gx, mr. Color 40th anniversary, mr. Crystal color, mr. Super metallic and lascivus.

Do not apply mr. Colour over a base coat of aqueous hobby colour and acrysion, but it can be done the other way around.

How to apply mr. Color

Apply 1 to 2 coats when painting with a paint brush, or 2 to 3 coats for airbrushing. Let dry between coats for a few hours before applying more.

Tips:

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10 % C30 Flat Base to change gloss colours to a semi-gloss finish, or 10 to 20 % for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.

Attention:

• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well-ventilated area.

Made in Japan.