Tamiya Masking Fluid 87229

Description

This special light green fluid can be used to mask off areas that tape would struggle on – including complex or curved shapes and difficult surface finishes.

It can be applied directly from the bottle, and minimal dripping makes for a clean, precise job. ★Can be used with Tamiya Color paint products.

Bottle weight: 20g.

Directions for Use

• Wipe oil from target surface with detergent.
• Apply directly from bottle and allow to dry completely.
• Cut off of area to be painted and remove other unnecessary sections, then paint.
• Remove masking fluid after topcoat has dried completely.

Directions:

• Apply masking fluid after base coat has dried completely.
• Apply a thin layer. (It takes about 30 minutes to dry.) Thicker layers take time to dry.
• Use a new modeling knife blade when cutting off dried masking fluid. Hold down any edges of the dried fluid that have space beneath.
• This fluid is water-based. Apply over water-based paints with care.
• Fluid applied on complex surfaces may be difficult to remove.
• Handle bottle gently to avoid unintentional leakages.
• If nozzle is clogged, remove and clean it off.

Contents subject to change.